"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 5 in stock

Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

 5 in stock

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 5 in stock

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 5 in stock

Ball bearing for 5 speed gearboxes

 5 in stock

92295702-z 92295702 GU92295702 92 29 57 02
 9229 5702 9229.5702 92.29.57.02

Gasket for distributor to crankcase interface

 5 in stock

 12715901 GU12715901 12 71 59 01
 1271 5901 1271.5901 12.71.59.01

Complete Speedo (odometer) cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 4 in stock

12760400-z 12760400 GU12760400 12 76 04 00
 1276 0400 1276.0400 12.76.04.00

Left hand choke cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 4 in stock

 17133550 GU17133550 17 13 35 50
 1713 3550 1713.3550 17.13.35.50

New type clutch friction plate for models with deep splines with deep splined centre

2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)

These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510

 4 in stock

 05084430 GU05084430 05 08 44 30
 0508 4430 0508.4430 05.08.44.30

Continental type fuse, rated at 25 amp (blue)

 4 in stock